"Made in Germany" Side mount license plate holder with TÜV Test Report § 19/3forKawasaki VN 1500 Classic / VNT50D, VNT50N Kawasaki VN 1500 Vulcan, SE / VNT50AAttention: The product only fits Kawasaki VN 1500 SE models if both exhaust pipes are on the right.The side mount license plate holder is supplied pre-assembled with all parts required for assembly. Our side mount license plate holder are made of steel and are available in high-gloss chrome, black glossy powder coated or black matt powder coated. In order to achieve corrosion resistance in powder coating, such as chrome, the side mount license plate holder are galvanically nickel-plated before powder coating. All side mount license plate holder are supplied with a black LED light. The LED light has an e-mark and is also listed in the TÜV Test Report. The side mount license plate holder is supplied with a TÜV Test Report § 19/3, an assembly instruction and a pats list. All removable parts are available as spare parts.
Fender Struts (1 Set) with TÜV Test Reports §19/3for Kawasaki VN 1500 Classic / VNT50D, VNT50NThe rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering around 40mm of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ring.Turnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3
The seat fits only on the Motorrad Burchard tail conversion. For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
Cat Eye" rear light E-approvedDimensions:Width: approx. 12.5 cm Height: approx. 6.5 cmDistance between mounting points: approx. 5 cmIncluded in delivery: 1 piece
Fender "Flat" Style for rear wheels Material: Steel Raw Used universally for wheel sizes between 15 - 17" Total length is 1210 mm Radius: 385mmSheet thickness: 1,5mmThe following widths are available: 200mm - for approx. 170mm - 180mm wide rear wheels 220mm - for approx. 200mm wide rear wheels The fenders are supplied as universal fenders and are available in various widths. The width is measured from the inside. We can manufacture your fender according to your specifications. Please give us your desired width, length and radius at the request.
License plate holder for Cat Ey universal Wide= 12,5 cm High= 6,5 cm Made of stainless steel