Burchard Excellence side license plate holder - Made in Germany with TÜV parts certificateGive your motorcycle an individual and high-quality finish with the side license plate holder from Burchard Excellence. This product is manufactured in Germany and stands for the highest quality workmanship and precision.The holder is supplied including LED license plate lighting and comes with a TÜV parts certificate in accordance with §19 Para. 3 StVZO. The certificate confirms the technical permissibility of the conversion in compliance with certain conditions and vehicle-specific instructions. The operating license only remains valid if the conversion is fitted correctly in accordance with the instructions and the information is implemented in full.Suitable for:Honda VT 750 ACE C2 / Type: RC44 / Type approval: e4*92/61*0102*Honda VT 750 Black Widow / Type: RC48 / Type approval: e4*92/61*0085*Material:The license plate holder is made of robust steel. You have the choice between a high-gloss chrome-plated surface, nickel-plated version with black gloss coating or black matt powder coating. The selection is made conveniently via the variant option in the store.License plate size:Suitable for almost all European license plate sizes. The suitable base plate can also be selected via the variant option. Permitted formats include:Germany: 180x200 mm to 220x200 mmAustria: 210x170 mmSwitzerland: 180x140 mmDenmark: 230x170 mmFrance: 170x130 mmNetherlands: 210x145 mmItaly: 175x175 mmand many moreLighting:The holder is supplied with high-quality LED license plate lighting. This has three SMD diodes and is E-approved. It guarantees even and bright illumination of the license plate.Installation:The side license plate holder is supplied pre-assembled. All screws required for mounting are included in the scope of delivery. It is mounted on the original wheel plug-in axle of the vehicle.Scope of delivery:Completely pre-assembled side license plate holderLED license plate lightTÜV parts certificateFastening materialImportant note on mounting:A centric M14x1.50x30 mm thread must be inserted into the original axle for fastening to the quick-release wheel axle. We provide this service free of charge when you purchase the item.Vehicle-specific requirements and instructions according to TÜV parts certificate:Installation must be carried out properly and professionally in accordance with the installation instructions or the manufacturer's specifications.The MB20 license plate holder is suitable for official license plates on motorcycles in accordance with Annex 4 of the FZV. The versions smaller than 220 do not justify any claim to the allocation of corresponding license plates.The license plate must not protrude beyond the vehicle width according to the handlebars. For wider handlebars, a separate assessment by an officially recognized expert is required.The glass of the original license plate light must be completely covered with the enclosed film.The original wheel cover below the rear light must be shortened.Translated with DeepL.com (free version)
Das Soziuspad ist passend für das Heckteil von Motorrad BurchardFür unsere Sitzbänke stehen insgesamt 18 Muster zur Verfügung (siehe Mustertabelle). Die Sitzbänke werden mit allen zur Montage erforderlichen Zubehörteilen und, wenn nötig, mit einer Montageanleitung ausgeliefert. Die Sitzbänke werden von Hand gefertig "Made in Germany". Das Grundblech ist aus Stahl und Aufgepolstet werden die Sitzbänke mit ca. 3 cm Verbundschaum.Sollten Sie einen Sonderwunsch haben, z.B. abweichende Kederfarbe oder Echtleder, fragen Sie die Preise dazu bitte bei uns an. Alle Muster werden auf Bestellung gefertigt. Die Lieferzeit hierfuer beträgt ca. 8-10 Tage.
"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforHonda VT 750 Black Widow / RC48For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.
Fender Struts (1 Set) with TÜV Test Reports §19/3for Honda VT 750 ACE C2 / RC44Honda VT 750 Black Widow / RC48The rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering. You can use the shock absorber from the Honda VT 750 Shadow - Spirit.We can change this shock absorbers. The rear fender change is absolutely necessary when using the 6.00x15 " Rim ring.Turnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3
Fender "Flat" Style for rear wheels Material: Steel Raw Used universally for wheel sizes between 15 - 17" Total length is 1210 mm Radius: 385mmSheet thickness: 1,5mmThe following widths are available: 200mm - for approx. 170mm - 180mm wide rear wheels 220mm - for approx. 200mm wide rear wheels The fenders are supplied as universal fenders and are available in various widths. The width is measured from the inside. We can manufacture your fender according to your specifications. Please give us your desired width, length and radius at the request.