Rear wheel conversions for motorcycles

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Suzuki VL 800 Volusia / WVBM Suzuki M 800 Intruder / WVB4 Suzuki VL 1500 Intruder / AL Suzuki M 1500 Intruder / WVCU Suzuki VZR (M) 1800 Intruder / WVCA The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3for Suzuki VS 600 Intruder / VN51B Suzuki VS 750 Intruder / VR51B Suzuki VS 800 Intruder / VS52B Suzuki VS 1400 Intruder / VX51L The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the expert opinion. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Yamaha XV 1600 Wild Star / VP08 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Yamaha XVS 650 Drag Star - Classic / 4VR - 4XR - VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star - Classic / VP05 - VP16 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are available in either high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the expert opinion. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

"Made in Germany" Side mount license plate holder with TÜV Test Report § 19/3forKawasaki VN 1500 Classic / VNT50D, VNT50N Kawasaki VN 1500 Vulcan, SE / VNT50AAttention: The product only fits Kawasaki VN 1500 SE models if both exhaust pipes are on the right.The side mount license plate holder is supplied pre-assembled with all parts required for assembly. Our side mount license plate holder are made of steel and are available in high-gloss chrome, black glossy powder coated or black matt powder coated. In order to achieve corrosion resistance in powder coating, such as chrome, the side mount license plate holder are galvanically nickel-plated before powder coating. All side mount license plate holder are supplied with a black LED light. The LED light has an e-mark and is also listed in the TÜV Test Report. The side mount license plate holder is supplied with a TÜV Test Report § 19/3, an assembly instruction and a pats list. All removable parts are available as spare parts.

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Kawasaki VN 900 Custom / VN900C Kawasaki VN 900 Classic / VN900B The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Kawasaki VN 800 Vulcan / VN800A Kawasaki VN 800 Classic / VN800B The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Honda VT 750 Shadow / RC50 Honda VT 750 Spirit / RC53 Honda VT 1100 Shadow / SC23 Honda VT 1100 ACE C2 / SC32 Honda VT 1100 ACE C3 / SC39 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the expert opinion. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

Burchard Excellence side license plate holder - Made in Germany with TÜV parts certificateGive your motorcycle an individual and high-quality finish with the side license plate holder from Burchard Excellence. This product is manufactured in Germany and stands for the highest quality workmanship and precision.The holder is supplied including LED license plate lighting and comes with a TÜV parts certificate in accordance with §19 Para. 3 StVZO. The certificate confirms the technical permissibility of the conversion in compliance with certain conditions and vehicle-specific instructions. The operating license only remains valid if the conversion is fitted correctly in accordance with the instructions and the information is implemented in full.Suitable for:Honda VT 750 ACE C2 / Type: RC44 / Type approval: e4*92/61*0102*Honda VT 750 Black Widow / Type: RC48 / Type approval: e4*92/61*0085*Material:The license plate holder is made of robust steel. You have the choice between a high-gloss chrome-plated surface, nickel-plated version with black gloss coating or black matt powder coating. The selection is made conveniently via the variant option in the store.License plate size:Suitable for almost all European license plate sizes. The suitable base plate can also be selected via the variant option. Permitted formats include:Germany: 180x200 mm to 220x200 mmAustria: 210x170 mmSwitzerland: 180x140 mmDenmark: 230x170 mmFrance: 170x130 mmNetherlands: 210x145 mmItaly: 175x175 mmand many moreLighting:The holder is supplied with high-quality LED license plate lighting. This has three SMD diodes and is E-approved. It guarantees even and bright illumination of the license plate.Installation:The side license plate holder is supplied pre-assembled. All screws required for mounting are included in the scope of delivery. It is mounted on the original wheel plug-in axle of the vehicle.Scope of delivery:Completely pre-assembled side license plate holderLED license plate lightTÜV parts certificateFastening materialImportant note on mounting:A centric M14x1.50x30 mm thread must be inserted into the original axle for fastening to the quick-release wheel axle. We provide this service free of charge when you purchase the item.Vehicle-specific requirements and instructions according to TÜV parts certificate:Installation must be carried out properly and professionally in accordance with the installation instructions or the manufacturer's specifications.The MB20 license plate holder is suitable for official license plates on motorcycles in accordance with Annex 4 of the FZV. The versions smaller than 220 do not justify any claim to the allocation of corresponding license plates.The license plate must not protrude beyond the vehicle width according to the handlebars. For wider handlebars, a separate assessment by an officially recognized expert is required.The glass of the original license plate light must be completely covered with the enclosed film.The original wheel cover below the rear light must be shortened.Translated with DeepL.com (free version)

Fender "Round" 230mm wide forYamaha XV 950 / VN03 and VN07The fender Is delivered completely ready for assembly, including Assembly material. The fender fits into the original Rear part struts. The fender is suitable for an effective Tyre Width up to 205mm.Please note that the original bench no longer fits. Here the bench must be adjusted or our bench installed. Upon request, we also offer the Revision Of the original Rear Part Struts (Reduction).

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforSuzuki VL 800 Volusia / WVBMFor our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

Das Soziuspad ist passend für das Heckteil von Motorrad BurchardFür unsere Sitzbänke stehen insgesamt 18 Muster zur Verfügung (siehe Mustertabelle). Die Sitzbänke werden mit allen zur Montage erforderlichen Zubehörteilen und, wenn nötig, mit einer Montageanleitung ausgeliefert. Die Sitzbänke werden von Hand gefertig "Made in Germany". Das Grundblech ist aus Stahl und Aufgepolstet werden die Sitzbänke mit ca. 3 cm Verbundschaum.Sollten Sie einen Sonderwunsch haben, z.B. abweichende Kederfarbe oder Echtleder, fragen Sie die Preise dazu bitte bei uns an. Alle Muster werden auf Bestellung gefertigt. Die Lieferzeit hierfuer beträgt ca. 8-10 Tage.

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforYamaha XVS 1100 Drag Star / VP05 For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforYamaha XVS 650 Drag Star / 4VR - 4XRYamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforKawasaki VN 900 Custom - Classic / VN900C - VN900BFor our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforKawasaki VN 800 Vulcan - Classic / VN800A - VN800BFor our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

"Made in Germany" motorcycle bench solo seatfor Honda VT 1100 Shadow / SC23 Honda VT 1100 ACE C2 / SC32The base plate is made of steel. The seats are upholstered with approx. 3 - 4 cm (hard rider seat, solo seat) or 4 - 6 cm (seat with step) composite foam.A total of 18 patterns are available for our benches (see pattern table). Benches are delivered with all accessories necessary for assembly and, if necessary, with assembly instructions.The seat bench slides with the front bracket under the tank, at the rear the seat bench must be screwed to the mudguard (drill hole accordingly).The seat fits additionally for the motorcycle Burchard tail section conversion. The picture shows pattern 10 "Westernstyle

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforHonda VT 750 Black Widow / RC48For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

Fender Struts (1 Set) with TÜV Test Reports §19/3forYamaha XVS 650 Drag Star and Drag Star Classic / 4VR - 4XR - VM02 - VM03 - VM04The rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ringTurnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3

Stainless steel Spoke Set for 6.00x15" rear wheelforYamaha XVS 650 Drag Star / 4VR - 4 XR - VM02The Spoke Set is used for the conversion to a 6.00 x15" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.

Rim Ring 6.00x15 " for rear with TÜV Test Report §19/3forYamaha XVS 650 Drag Star / 4VR - 4XR - VM02For the conversion to a wide rear wheel we offer a 6.00x15" Rim Ring.With the rim ring you can drive a 200mm rear tyre.The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard.The original Spoke Set no longer fits.Additional Information:When using the Tire Wide Metzeler 200/70 B 15 M/C ME 880 Marathon some changes (rear or swingarm) are required. You can read the required changes in the categories.Included in the delivery:1 x Rim ring 6.00x15 " with TÜV Test Report §19/3

Rim Ring 6.00x15 " for rear with TÜV Test Report §19/3forYamaha XVS 1100 Drag Star / VP05For the conversion to a wide rear wheel we offer a 6.00x15" Rim Ring.With the rim ring you can drive a 200mm rear tyre.The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard.The original Spoke Set no longer fits.Additional Information:When using the Tire Wide Metzeler 200/70 B 15 M/C ME 880 Marathon some changes (rear or swingarm) are required. You can read the required changes in the categories.Included in the delivery:1 x Rim ring 6.00x15 " with TÜV Test Report §19/3

Fender Struts (1 Set) with TÜV Test Reports §19/3forYamaha XVS 1100 Drag Star / 4VR - 4XR - VM02The rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ringTurnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3

Fender Struts (1 Set) with TÜV Test Reports §19/3for Suzuki VS 1400 Intruder / VX51LThe rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ring.Turnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3