"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Kawasaki VN 800 Vulcan / VN800A Kawasaki VN 800 Classic / VN800B The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are optionally available in high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the certificate. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

Das Soziuspad ist passend für das Heckteil von Motorrad BurchardFür unsere Sitzbänke stehen insgesamt 18 Muster zur Verfügung (siehe Mustertabelle). Die Sitzbänke werden mit allen zur Montage erforderlichen Zubehörteilen und, wenn nötig, mit einer Montageanleitung ausgeliefert. Die Sitzbänke werden von Hand gefertig "Made in Germany". Das Grundblech ist aus Stahl und Aufgepolstet werden die Sitzbänke mit ca. 3 cm Verbundschaum.Sollten Sie einen Sonderwunsch haben, z.B. abweichende Kederfarbe oder Echtleder, fragen Sie die Preise dazu bitte bei uns an. Alle Muster werden auf Bestellung gefertigt. Die Lieferzeit hierfuer beträgt ca. 8-10 Tage.

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforKawasaki VN 800 Vulcan - Classic / VN800A - VN800BFor our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

Fender Struts (1 Set) with TÜV Test Reports §19/3for Kawasaki VN 800 Vulcan - Classic / VN800A, VN800BThe rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering around 40mm of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ring.Turnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3

Rim Ring 6.00x15 " for rear with TÜV Test Report §19/3forKawasaki VN 800 Vulcan - Classic / VN800A, VN800BFor the conversion to a wide rear wheel we offer a 6.00x15" Rim Ring.With the rim ring you can drive a 200mm rear tyre.The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard.The original Spoke Set no longer fits.Additional Information:When using the Tire Wide Metzeler 200/70 B 15 M/C ME 880 Marathon some changes (rear or swingarm) are required. You can read the required changes in the categories.Included in the delivery:1 x Rim ring 6.00x15 " with TÜV Test Report §19/3

Stainless steel Spoke Set for 6.00x15" rear wheelforKawasaki VN 800 Vulcan - Classic / VN800A, VN800BThe Spoke Set is used for the conversion to a 6.00 x15" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.

Cat Eye" rear light E-approvedDimensions:Width: approx. 12.5 cm Height: approx. 6.5 cmDistance between mounting points: approx. 5 cmIncluded in delivery: 1 piece

Fender "Flat" Style for rear wheels Material: Steel Raw Used universally for wheel sizes between 15 - 17" Total length is 1210 mm Radius: 385mmSheet thickness: 1,5mmThe following widths are available: 200mm - for approx. 170mm - 180mm wide rear wheels 220mm - for approx. 200mm wide rear wheels The fenders are supplied as universal fenders and are available in various widths. The width is measured from the inside. We can manufacture your fender according to your specifications. Please give us your desired width, length and radius at the request.

Rear sprocket offset kit for Kawasaki VN 800 Vulcan - Classic / VN800A, VN800B

License plate holder for Cat Ey universal Wide= 12,5 cm High= 6,5 cm Made of stainless steel

Brake cable modificationfor Kawasak VN 800 Vulcan - Classic / VN800A, VN800BThrough the change the installation of a 6.00 x15 " Rim Ring with a 200mm rear wheel is possible.

Swing arm modification forKawasaki VN 800 Vulcan - Classic / VN800A, VN800BThrough the change the installation of a 6.00 x15 " Rim Ring with a 200mm rear wheel is possible.To change, the original swingarm must be sent to us. In addition to the postage costs, no additional costs are incurred.The swingarm is widened by us and provided with a new serial number. The price does not include a paint job.Please note that the change is integrated in the TÜV Test Report of our 6.00 x15 " Rim Ring and therefore also only in connection with aMotorrad Burchard 6.00 x15 " Rim Ring is valid. A separate TÜV Test Report only on the swing arm change does not exist.The picture is an example image of a modified swingarm from a Kawasaki VN 800 Classic.

When the Kawasaki VN 800 Vulcan Classic sits firmly and low on the road, every kilometer feels a little more like true cruiser culture. With this shock absorber lowering kit, you can bring your bike visually closer to the asphalt - and enjoy a harmonious line without sacrificing a clean, comprehensible solution.Technical features:Lowers the motorcycle by approx. 4.7 cm (measured above the center of the rear wheel)Suitable for Kawasaki VN 800 Vulcan Classic (VN800A / VN800B)Including TÜV parts certificate according to §19/3Compatible with original rear section and Burchard Excellence rear section conversionPrice alternative to new struts by modifying the original partsThe big advantage: you keep your original shock absorbers, but get a professional lowering - including a new serial number. The result is a harmonious look that fits perfectly with chopper and cruiser conversions.Installation / procedure:After purchase, send us your original shock absorbers. We will lower the shock absorbers professionally and send them back to you. No additional fitting costs - except for postage.Get the low ride your Vulcan deserves - order now and start the conversion.

Spoke and Center for Motorrad Burchard Rim Rings and Spoke Sets. For3.50x16" Rim Ring with Spoke Set 6.00x15" Rim Ring with Spoke SetYou send us your original wheel hub and we take over the spoke and centering.