"Made in Germany Side license plate holder with TÜV parts certificate according to §19/3 for Yamaha XVS 650 Drag Star - Classic / 4VR - 4XR - VM02 - VM03 - VM04 Yamaha XVS 1100 Drag Star - Classic / VP05 - VP16 The side license plate holder is supplied pre-assembled with all parts required for installation. Our side license plate holders are made of steel and are available in either high-gloss chrome, glossy black powder-coated or matt black powder-coated. In order to achieve the same corrosion resistance with powder coating as with chrome plating, the footrest systems are nickel-plated before powder coating. All side license plate holders are supplied with a black LED license plate light. The license plate light has an E-mark and is also listed in the expert opinion. The license plate holders are made of steel and are available in chrome, glossy black or matt black powder-coated "Made in Germany". The license plate holder is supplied with a TÜV parts certificate in accordance with § 19/3 StVZO, installation instructions and a parts list. All unscrewable parts are available as spare parts.

Das Soziuspad ist passend für das Heckteil von Motorrad BurchardFür unsere Sitzbänke stehen insgesamt 18 Muster zur Verfügung (siehe Mustertabelle). Die Sitzbänke werden mit allen zur Montage erforderlichen Zubehörteilen und, wenn nötig, mit einer Montageanleitung ausgeliefert. Die Sitzbänke werden von Hand gefertig "Made in Germany". Das Grundblech ist aus Stahl und Aufgepolstet werden die Sitzbänke mit ca. 3 cm Verbundschaum.Sollten Sie einen Sonderwunsch haben, z.B. abweichende Kederfarbe oder Echtleder, fragen Sie die Preise dazu bitte bei uns an. Alle Muster werden auf Bestellung gefertigt. Die Lieferzeit hierfuer beträgt ca. 8-10 Tage.

"Made in Germany"The seat fits only on the Motorrad Burchard tail conversionforYamaha XVS 650 Drag Star / 4VR - 4XRYamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a special request, for example real leather. pleas ask for the prices.

Fender Struts (1 Set) with TÜV Test Reports §19/3forYamaha XVS 650 Drag Star and Drag Star Classic / 4VR - 4XR - VM02 - VM03 - VM04The rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened.The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of Motorrad Burchard.When using the rear fender struts we recommend the shock absorber lowering of Motorrad Burchard.The rear fender change is absolutely necessary when using the 6.00x15 " Rim ringTurnsignals or a turnsignal-taillight combination with M8 threads can be installed in the rear fender struts holes.Included in the delivery:1 x Rear fender struts including mounting material (1 Set) with TÜV Test Report §19/3

Stainless steel Spoke Set for 6.00x15" rear wheelforYamaha XVS 650 Drag Star / 4VR - 4 XR - VM02The Spoke Set is used for the conversion to a 6.00 x15" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.

Rim Ring 6.00x15 " for rear with TÜV Test Report §19/3forYamaha XVS 650 Drag Star / 4VR - 4XR - VM02For the conversion to a wide rear wheel we offer a 6.00x15" Rim Ring.With the rim ring you can drive a 200mm rear tyre.The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard.The original Spoke Set no longer fits.Additional Information:When using the Tire Wide Metzeler 200/70 B 15 M/C ME 880 Marathon some changes (rear or swingarm) are required. You can read the required changes in the categories.Included in the delivery:1 x Rim ring 6.00x15 " with TÜV Test Report §19/3

Shock absorber lowering with TÜV Test Report §19/3 for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 By the conversion the motorcycle is lowered by approx. 4,0 cm (measured above the rear wheel centre) Material Steel chrome With TÜV Test Report 19/3 (TÜV Nord) for the Honda VT 600 Shadow The lowering kit is delivered with all parts required for assembly. Attention to the conversion you need a spring tensioner Mounting NOTE: 1. Squeeze Spring with spring tensioner 2. Unscrew the shock absorber head 3. Relieve the spring tension and remove the spring 4. Push the large ring over shock absorber housing 5. Remove the old stop Bush from the piston rod, slide the supplied plastic bushing over the piston rod 6. Push the spring and press it together with the spring tensioner 7. Screw new Shock absorber head, relieve spring 8. Take the Bush from the old shock absorber head and re-press into the new one You can also let us done the shock absorber conversion. The original shock absorber must be sent to us for conversion. In addition, please order the service "shock absorber lowering for MB00-1080-MB00-1081-MB00-3050-H472-0065". The shock absorbers are lowered by us.

Cat Eye" rear light E-approvedDimensions:Width: approx. 12.5 cm Height: approx. 6.5 cmDistance between mounting points: approx. 5 cmIncluded in delivery: 1 piece

Fender "Flat" Style for rear wheels Material: Steel Raw Used universally for wheel sizes between 15 - 17" Total length is 1210 mm Radius: 385mmSheet thickness: 1,5mmThe following widths are available: 200mm - for approx. 170mm - 180mm wide rear wheels 220mm - for approx. 200mm wide rear wheels The fenders are supplied as universal fenders and are available in various widths. The width is measured from the inside. We can manufacture your fender according to your specifications. Please give us your desired width, length and radius at the request.

License plate holder for Cat Ey universal Wide= 12,5 cm High= 6,5 cm Made of stainless steel

Swing arm modification forYamaha XVS 650 Drag Star / 4VR - 4XR - VM02Through the change the installation of a 6.00 x15 " Rim Ring with a 200mm rear wheel is possible.To change, the original swingarm must be sent to us. In addition to the postage costs, no additional costs are incurred.The swingarm is widened by us and provided with a new serial number. The price does not include a paint job.Please note that the change is integrated in the TÜV Test Report of our 6.00 x15 " Rim Ring and therefore also only in connection with aMotorrad Burchard 6.00 x15 " Rim Ring is valid. A separate TÜV Test Report only on the swing arm change does not exist.The picture is an example image of a modified swingarm from a Kawasaki VN 800 Classic.

Spoke and Center for Motorrad Burchard Rim Rings and Spoke Sets. For3.50x16" Rim Ring with Spoke Set 6.00x15" Rim Ring with Spoke SetYou send us your original wheel hub and we take over the spoke and centering.